position-manager¶

Where the site's hardware is. position-manager owns config/positions.json: the rooms and the location each is in, the racks, where each device is placed, the devices nothing manages, and the few cables nothing can see. It changes no device and no device record: a placement names a device as network-manager topology names it — a node, a switch, an access point, a machine, or a device recorded here — and only says where that device stands.

A location is the site's (site-manager location list): a room is in one, a rack is in a room, a device is placed in a rack or loose in a room. A device with no placement is somewhere at its location; the console lists it under that location.

rack-manager is its old name, and racks.json its file's: rack-manager answers the same verbs for one release, and the update renames the file (rooms get the primary location, mounts become placements).

The console's Site › Physical tab draws it by location, room and rack, with faceplates and the links the switches and LLDP see drawn port to port, through network-manager topology, which carries the positions resolved against the site.

The record¶

config/positions.json (schema: schemas/positions-fields.json):

{
  "version": 1,
  "rooms": {
    "basement": { "displayName": "Basement" },
    "shed": { "displayName": "Shed", "location": "hareskov" }
  },
  "racks": {
    "rack1": { "units": 42, "width": "19in", "numbering": "bottom-up", "room": "basement" }
  },
  "placements": {
    "tappaas1": { "rack": "rack1", "u": 10, "height": 2, "width": "full", "face": "front", "faceplate": "generic/server-2u" },
    "USW Pro XG 10 PoE": { "rack": "rack1", "u": 30, "height": 1, "width": "full", "face": "front", "faceplate": "unifi/usw-pro-xg-10-poe" },
    "patch1": { "rack": "rack1", "u": 32, "height": 1, "width": "full", "face": "front" },
    "ISP modem": { "room": "basement" }
  },
  "devices": {
    "ISP modem": { "kind": "modem", "model": "generic/isp-modem" },
    "patch1": { "kind": "patch-panel", "ports": ["1", "2", "…", "24"], "displayName": "Patch panel A" },
    "printer": { "kind": "other", "ports": ["eth0"], "mac": "aa:bb:cc:00:11:22", "displayName": "printer-1" }
  },
  "cables": [
    { "from": { "device": "USW Pro XG 10 PoE", "port": "5" }, "to": { "device": "ISP modem", "port": "LAN 1" }, "kind": "uplink", "label": "ISP hand-off" },
    { "from": { "device": "USW Pro XG 10 PoE", "port": "8" }, "to": { "device": "printer", "port": "eth0" }, "kind": "patch" },
    { "from": { "device": "USW Pro XG 10 PoE", "port": "2" }, "to": { "device": "patch1", "port": "1", "side": "front" }, "kind": "patch", "origin": "seen" },
    { "from": { "device": "patch1", "port": "1", "side": "rear" }, "to": { "device": "tappaas2", "port": "enp97s0" }, "kind": "patch", "origin": "seen" }
  ]
}

• rooms are where racks stand and where a device can stand loose. A room's location names one of the site's locations; unset, it is the primary location.
• A rack's room names a room record; text that names no room yet is kept, and validate notes it.
• A placement is in a rack — rack and u, the lowest unit a device takes as the rack numbers its units, height the units it takes, width full, half or third with a slot (its column, 0 at the left), face front or rear — or loose in a room: room, and no unit or size (its plate gives its size). A device has at most one placement.
• faceplate is a catalog key; unset, the view draws the catalog's suggestion for the device's model, else a generic plate.
• devices are the devices nothing manages — a modem, an ONT, a UPS, a patch panel, or something a switch port saw (modem, ont, ups, patch-panel, other) — each with its catalog model or its ports, the location it is at (unset: the primary) and, when a switch port saw it, its mac. A recorded device is a device like any other: the topology lists it with its kind and ports, the console draws it, it can be placed and it is a cable end.
• cables are only what nothing can see: the ISP's modem, a device recorded from a switch port, a patch panel, a PDU. A cable the switches or LLDP see comes from the topology and is never recorded. A device only a cable names is still placed by that cable, with its faceplate, and validate says how to record it (device add).
• A patch panel's port has a side: its front (the default) and its rear each take one cable. A link split at a panel port (cable split) is two recorded segments marked with their origin — the link the topology sees, or a recorded cable — the device port to the panel port's front, the panel port's rear to the far end. The topology still carries one link between the two devices, with its segments and the panel port it runs through; the Physical view draws the two wires.
• A passive plate nothing records (a PDU) can still be placed under a name of its own with a passive faceplate.

Verbs¶

mount add, mount modify, mount remove, mount list and mount show are the old names of place, place modify, unplace, place list and place show; they answer for one release.

Every changing verb takes --check (show the result, change nothing), locks, checks the whole resulting document and writes it atomically; a change that would leave it invalid writes nothing. The verbs that name a device read the topology (network-manager topology --json --no-health --no-positions) unless --topology <file> hands one in; when it cannot be read, device names are not checked and a warning says so. The location checks read config/site.json. rack delete, room delete, device remove, unplace and cable remove are destructive (the console asks for the name).

A site whose config/racks.json the update has not renamed yet is read as it is; a change is refused until it has been.

Recording a device¶

A cable recorded before devices could be (the ISP's modem, named only on its cable) keeps working; validate points it out. Recording the device keeps the cable as it is:

position-manager device add 'ISP modem' --kind modem --model generic/isp-modem --check
position-manager device add 'ISP modem' --kind modem --model generic/isp-modem
position-manager place 'ISP modem' --room basement      # or --rack rack1 --u 3

A device a switch port sees — a printer, a camera — is listed by the topology at its port with its MAC and what LLDP or its lease says. One verb records it and its cable:

position-manager device record 'USW Pro XG 10 PoE:8' --name printer --kind other --check
position-manager device record aa:bb:cc:00:11:22 --name printer --kind other
position-manager place printer --room office

The faceplate catalog¶

faceplates/<vendor>/<model>.json, one plate each:

{
  "vendor": "UniFi", "model": "USW Pro XG 10 PoE", "match": ["USWED77"],
  "kind": "switch", "units": 1, "width": "full",
  "rows": [
    [{ "name": "Port 1", "kind": "poe" }, …, { "name": "Port 11", "kind": "sfp+" }],
    [{ "name": "Port 2", "kind": "poe" }, …, { "name": "Port 12", "kind": "sfp+" }]
  ],
  "labels": [{ "text": "UniFi", "at": "left" }]
}

• rows are the port rows top to bottom (null is a gap). A port's name is the controller's ("Port 11", "sfp-sfpplus1"); its id, the topology's, is the number of "Port N", else the name, unless given. kind is rj45, sfp+, sfp28, poe, console or power.
• match lists the models and names the inventories report the device by: the catalog's suggestion for a device is the plate whose model or match is its model or name.
• generic nics fills the plate from a node's NICs (its uplinks), ports from a switch's ports (odd over even). The generic plates are the suggestion for a device the catalog lacks: a node gets generic/server-2u, a switch generic/switch-1u.
• passive marks a device nothing can see (patch panel, PDU, modem).

A new model is a new file; faceplates show <key> checks it without the console.

Lifecycle¶

install.sh / update.sh build the flake package and link position-manager (and rack-manager, its old name, for one release) into ~/bin; the package carries the catalog beside the compiled sources. test.sh is offline: the unit suite over hrossen's topology and the CLI against a temp config. validate.sh runs position-manager validate.